Fire performance and reliability testing of horizontal type structural systems or components
(e.g., floors, ceilings, supporting beams or their assemblies) in fires with or without mechanical loads in the lateral direction
Fire performance and reliability testing of passive fire protection system for horizontally positioned systems
Features of Test Facility
Rectangular type vertical furnace is used to apply the elevated temperature due to fires.
Temperature control is made in accordance with the designated temperature versus time history as per
international standards or other fire scenarios.
Hydraulic actuator is installed to apply the mechanical loads up to 2MN and/or 150mm stroke in the
vertical direction.
Watch holes are allocated to close-eye monitor during testing.
Remote control and automatic test data measurements are made.
Specification
Maximum specimen size: W4.5 x L6.5 (m)
Maximum temperature: 1,430 deg.C
Gas burner: Max. 463kW
Exhaust gas treatment system: 1,200㎥/min
Maximum loading capacity: 3MN and 450mm stroke
Data acquisition sampling rate: 10S/s
Sample Test Standards
ISO-22899-1
Determination of the resistance to jet fires of passive fire protection materials
- Part 1: General requirements
ISO-22899-2
Determination the resistance to jet fires of passive fire protection materials - Part 2: Validation, interpretation and classification methods
UL 199
Automatic sprinkles for fire-protection service
UL 2335
Fire tests of storage pallets
NFPA 10
Standard for partable fire extinguishers
OTI 95 634
Jet-fire resistance test of passive fire protection materials