Jet or pool fire testing to identify fire load characteristics, e.g., temperature and heat flux with or without fire
suppression
Fire performance and reliability testing of active fire protection systems, e.g., fire detection and alarm, fire
suppression and firefighting systems, as well as passive fire protection (PFP) system
Fire performance and reliability testing of water deluge, spray, and mist systems
Features of Test Facility
Designated jet or pool fire scenarios can be tested.
Water spay and deluge system is facilitated.
Heat protection wall and roof panels are facilitated.
Smoke and water vapor during fire testing are managed safely.
Remote control and automatic test data measurements are made.
Specification
Test space: 30 x 25 x 16 (m)
Gas supply: ~1kg/s (LPG or LNG)
Water supply: ~20 (ℓ/min)/㎡
Data acquisition: 5 S/s, 184 ch.
Gas storage capacity: 4.9ton
Water storage capacity: 600ton
Sample Test Standards
ISO-22899-1
Determination of the resistance to jet fires of passive fire protection materials
- Part 1: General requirements
ISO-22899-2
Determination the resistance to jet fires of passive fire protection materials - Part 2: Validation, interpretation and classification methods
UL 199
Automatic sprinkles for fire-protection service
UL 2335
Fire tests of storage pallets
NFPA 10
Standard for partable fire extinguishers
OTI 95 634
Jet-fire resistance test of passive fire protection materials