Buckling collapse performance and reliability testing of structural systems or components
(e.g., columns, pillars, plate panels) in fires under axial compressive loads
Fire performance and reliability testing of passive fire protection system with or without axial compressive
loads
Features of Test Facility
Cylindrical type furnace is used to apply the elevated temperature due to fires.
Temperature control is made in accordance with the designated temperature versus time history as per
international standards or other fire scenarios.
Hydraulic actuator is installed to apply the mechanical loads up to 10MN and/or 200mm stroke in the
vertical direction.
Watch holes are allocated to close-eye monitor during testing.
Remote control and automatic test data measurements are made.
Specification
Internal diameter of furnace: 4.5m
Maximum test model size: Ø2 x L5 (m)
Maximum temperature: 1,430 deg.C
Gas burner: Max. 463kW
Overall internal length of furnace: 5m
Exhaust gas treatment system: 1200㎥/min
Maximum loading capacity: 10MN and 200mm stroke
Data acquisition sampling rate: 10 S/s
Sample Test Standards
ASTM E 119
Standard test methods for fire tests of building construction and materials
ISO 834-1
Fire-resistance tests - Elements of building construction - Part 1: General requirements
ISO 834-7
Fire-resistance tests - Elements of building construction
- Part 7: Specific requirements for columns
UL 1709
Rapid rise fire tests of protection materials for structural steel